Solution Description
Merchandise Description
The reducer is typically used for lower-speed and large-torque transmission equipment. The motor, inner combustion engine or other high-pace operating electrical power is utilised to accomplish the goal of deceleration by meshing with the massive equipment on the output shaft by way of a gear with a modest amount of teeth on the enter shaft of the reducer. The reducer will also have numerous pairs of gears with the same basic principle to attain the perfect reduction result. The ratio of the number of tooth of the big and modest gears is the transmission ratio.
| SPECIFICATIONS | Phase | RATIO | RATED TORQUE (N.m) | ||
| PLE42-SW-42mm Planetry Gearbox | L1 | 4 | 9 | ||
| five | 9 | ||||
| seven | 5 | ||||
| ten | 5 | ||||
| L2 | sixteen | 12 | |||
| twenty | 12 | ||||
| twenty five | 10 | ||||
| 28 | 10 | ||||
| 35 | 10 | ||||
| 40 | 10 | ||||
| 50 | 10 | ||||
| 70 | 10 | ||||
| Adapted motor | ∅5-10/ ∅22-2/F31-M3 | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Input Speed (rpm) | 6000/min | ||||
| Backlash | L1 | ≤15 Arcmin | |||
| L2 | ≤10 Arcmin | ||||
| Fault quit torque(N.m) | 2 instances of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average lifestyle span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.25 | |||
| L2 | 0.35 | ||||
| IP | 54 | ||||
| Installation method | Any installation strategy | ||||
Manufacturing Range
Listed here is our all items checklist. If you would like to select other sorts of planetary gearbox, make sure you CLICKING 1st Image to Look at Homepage.
forty two Series Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Assortment:
L1: 4,5,7,ten,
L2: 12,16,twenty,25,28,35,forty,fifty,70
Body Dimension: 42mm Input Flange
Gear Arrangement: Planetary Straight Tooth
sixty Series Planetary Gearbox
Backlash: 10-15 arcmin
Ratio Assortment:
L1: 4,5,7,10,
L2: sixteen,20,25,28,35,40,fifty,70
Frame Dimension: 60mm Input Flange
Gear Arrangement: Planetary Straight Tooth
90 Collection Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: sixteen,20,25,28,35,40,50,70
Body Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Tooth
Powder Metallic Series Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Assortment:
L1: 4,5,7,10,
L2: sixteen,twenty,25,28,35,forty,fifty,70
Frame Dimension: 42mm & 57mm
Gear Arrangement: Planetary Straight Enamel
Appropriate Angle Collection Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,
L2: 16,twenty,25,28,35,40,50,70
Frame Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Tooth
Application Subject
Computerized Arms
Assembly Line
3D-Printer
Health care -Gear
CNC Machine
Tapping Equipment
Other Automation Devices
Why Pick Us
ZheJiang Higher Precision Gear Transmission Co., Ltd
Organization Profile
ZheJiang Substantial Precision Gear Transmission Co., Ltd located in HangZhou city, ZheJiang Province, China. It is a foremost company dedicated in precision transmission parts and program study, manufacture and product sales, numerous sequence of goods are manufactured in its 5000 square CZPT workshop, the precision planetary gearbox and gear motor are created especially for photo voltaic energy market and have served several large-scale photo voltaic assignments worldwidely.
The analysis team has far more than 15 a long time activities in this discipline, who can ensure a punctual and productive services to meet up with customer’s specific needs. It has pasted the ISO9001 quality management technique and CE, items have been exported to lots of nations with a vast selection software in AGV, smart robot, logistic, industrial automation, solar strength, vessel, packaging and textile and so on.Regularly, our goal is to promote the application of solar energy sector in the globe, and we believe it supplies cleanse and sustainable energy for humanity to much better defend our environment.
Groups
Certifications
FAQ
Q1:Which areas are your goods largely utilised in?
A:At present, we have 2 primary merchandise: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are utilised in automation fields, these kinds of as healthcare products, 3D printers, door openers, tapping devices, CNC lathes and a series of automation products. In addition, our photo voltaic geared motors are utilised in photovoltaic power generation assignments, which are primarily mixed with rotary drives to drive photo voltaic panels to track daylight.
Q2: How to pick the suitable planetary gearbox?
A :First of all, we require you to be able to give related parameters. If you have a motor drawing, it will let us suggest a ideal gearbox for you more rapidly. If not, we hope you can give the pursuing motor parameters: output speed, output torque, voltage, recent, IP, sounds, running situations, motor dimensions and power, and so on.
Q3: What is the cost ?
A : The principal deciding element for the price tag of each solution is the buy volume. You can communicate with us and let us understand every other. I imagine that our prices, item high quality and our solutions can definitely make you content.
This fall: Do you give tailored provider?
A: Sure, we offer customized solutions. You only need to have to put CZPT your wants, and we will do our greatest to offer you with a prepare, make strategies, and try out our ideal to satisfy your requirements.
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Samples: |
US$ 42/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Planetary Gearbox Advantages and Disadvantages
A planetary gearbox is a type of mechanical drive with a single output shaft. They are suitable for both clockwise and counterclockwise rotations, have less inertia, and operate at higher speeds. Here are some advantages and disadvantages of this type of gearbox. Let us see what these advantages are and why you should use them in your applications. Listed below are some of the benefits of planetary gearboxes.
Suitable for counterclockwise and clockwise rotation
If you want to teach children about the clock hands, you can buy some resources for counterclockwise and asymmetrical rotation. These resources include worksheets for identifying degrees of rotation, writing rules for rotation, and visual processing. You can also use these resources to teach angles. For example, the translation of shapes activity pack helps children learn about the rotation of geometric shapes. Similarly, the visual perception activity sheet helps children understand how to process information visually.
Various studies have been done to understand the anatomical substrate of rotations. In a recent study, CZPT et al. compared the position of the transitional zone electrocardiographically and anatomically. The authors found that the transitional zone was normal in nine of 33 subjects, indicating that rotation is not a sign of disease. Similarly, a counterclockwise rotation may be caused by a genetic or environmental factor.
The core tip data should be designed to work in both clockwise and counterclockwise rotation. Counterclockwise rotation requires a different starting point than a clockwise rotation. In North America, star-delta starting is used. In both cases, the figure is rotated about its point. Counterclockwise rotation, on the other hand, is done in the opposite direction. In addition, it is possible to create counterclockwise rotation using the same gimbal.
Despite its name, both clockwise and counterclockwise rotation requires a certain amount of force to rotate. When rotating clockwise, the object faces upwards. Counterclockwise rotation, on the other hand, starts from the top position and heads to the right. If rotating in the opposite direction, the object turns counterclockwise, and vice versa. The clockwise movement, in contrast, is the reverse of counterclockwise rotation.
Has less inertia
The primary difference between a planetary gearbox and a normal pinion-and-gear reducer is the ratio. A planetary gearbox will produce less inertia, which is an important advantage because it will reduce torque and energy requirements. The ratio of the planetary gearbox to its fixed axis counterpart is a factor of three. A planetary gearbox has smaller gears than a conventional planetary, so its inertia is proportional to the number of planets.
Planetary gears are less inertia than spur gears, and they share the load across multiple gear teeth. This means that they will have low backlash, and this is essential for applications with high start-stop cycles and frequent rotational direction changes. Another benefit is the high stiffness. A planetary gearbox will have less backlash than a spur gearbox, which means that it will be more reliable.
A planetary gearbox can use either spur or helical gears. The former provides higher torque ratings while the latter has less noise and stiffness. Both types of gears are useful in motorsports, aerospace, truck transmissions, and power generation units. They require more assembly time than a conventional parallel shaft gear, but the PD series is the more efficient alternative. PD series planetary gears are suitable for many applications, including servo and robotics.
In contrast, a planetary gear set can have varying input speed. This can affect the frequency response of the gearset. A mathematical model of the two-stage planetary gears has non-stationary effects and correlates with experimental findings. Fig. 6.3 shows an addendum. The dedendum’s minimum value is approximately 1.25m. When the dedendum is at its smallest, the dedendum has less inertia.
Offers greater reliability
The Planetary Gearbox is a better option for driving a vehicle than a standard spur gearbox. A planetary gearbox is less expensive, and they have better backlash, higher load capacity, and greater shock loads. Unlike spur gearboxes, however, mechanical noise is virtually nonexistent. This makes them more reliable in high-shock situations, as well as in a wide range of applications.
The Economy Series has the same power density and torque capacity of the Precision Helical Series, but it lacks the precision of the latter. In contrast, Economy Series planetary gearboxes feature straight spur planetary gearing, and they are used in applications requiring high torque. Both types of gearboxes are compatible with NEMA servo motors. If torque density is important, a planetary gearbox is the best choice.
The Dispersion of External Load: The SSI model has been extensively used to model the reliability of planetary gear systems. This model takes the contact force and fatigue strength of the system as generalized stress and strength. It also provides a theoretical framework to evaluate the reliability of planetary gear systems. It also has many other advantages that make it the preferred choice for high-stress applications. The Planetary Gearbox offers greater reliability and efficiency than traditional rack and pinion gear systems.
Planetary gearing has greater reliability and compact design. Its compact design allows for wider applications with concerns about space and weight. Additionally, the increased torque and reduction makes planetary gearboxes an excellent choice for a wide variety of applications. There are three major types of planetary gearboxes, each with its own advantages. This article describes a few of them. Once you understand their workings, you will be able to choose the best planetary gearbox for your needs.
Has higher operating speeds
When you look at planetary gearboxes, you might be confused about which one to choose. The primary issue is the application of the gearbox. You must also decide on secondary factors like noise level, corrosion resistance, construction, price, and availability worldwide. Some constructors work faster than others and deliver the gearboxes on the same day. However, the latter ones often deliver the planetary gearbox out of stock.
Compared to conventional gearboxes, a planetary gearbox can run at higher speeds when the input speed fluctuates. However, these gears are not very efficient in high-speed applications because of their increased noise levels. This makes planetary gears unsuitable for applications involving a great deal of noise. That is why most planetary gears are used in small-scale applications. There are some exceptions, but in general, a planetary gearbox is better suited for applications with higher operating speeds.
The basic planetary gearbox is a compact alternative to normal pinion-and-gear reducers. They can be used in a wide variety of applications where space and weight are concerns. Its efficiency is also higher, delivering 97% of the power input. It comes in three different types based on the performance. A planetary gearbox can also be classified as a worm gear, a spur gear, or a sprocket.
A planetary gearhead has a high-precision design and can generate substantial torque for their size. It also reduces backlash to two arc-min. Additionally, it is lubricated for life, which means no maintenance is needed. It can fit into a small machine envelope and has a small footprint. Moreover, the helical crowned gearing provides fast positioning. A sealed gearbox prevents abrasive dust from getting into the planetary gearhead.
Has drawbacks
The design of a planetary gearbox is compact and enables high torque and load capability in a small space. This gear arrangement also reduces the possibility of wear and tear. Planet gears are arranged in a planetary fashion, allowing gears to shift under load and a uniform distribution of torque. However, some disadvantages of planetary gears must be considered before investing in this gearbox.
While the planetary gearbox is a high precision motion-control device, its design and maintenance requirements are a concern. The bearing load is high, requiring frequent lubrication. Also, they are inaccessible. Despite these drawbacks, planetary gearboxes are suitable for a variety of tasks. They also have low backlash and high torsional stiffness, making them excellent choices for many applications.
As a result, the speed of a planetary gearbox varies with load and speed. At lower ratios, the sun gear becomes too large in relation to the planet gears. As the ratio increases, the sun gear will become too low, reducing torque. The planetary gears also reduce their torque in high-speed environments. Consequently, the ratio is a crucial consideration for planetary gearbox condition monitoring.
Excess drag may result from out-of-tolerance components or excessive lubrication. Drag should be measured both in directions and be within acceptable ranges. Grease and oil lubrication are two common planetary gearbox lubricants, but the choice is largely dependent on your application. While grease lubricates planetary gears well, oil needs maintenance and re-lubrication every few thousand hours.
editor by CX 2023-04-13